IS-Motorsport UK logo

202A111-196 Straight Non-lipped Heat-shrinkable Boot

Applications
Mechanical protection and cable connector strain relief. As the part does not have a lip it can be installed directly onto the connector accessory thread.

Materials Available
-3 Semi-rigid modified Polyolefin
-4 Flexible modified Polyolefin
-12 Modified Fluoro-elastomer
-25 Fluid resistant modified Elastomer
-100 Low fire hazard material

Coatings Available
-3 & -4:
/42 General purpose hot melt adhesive
/86 High temperature hot melt adhesive

-25:
/42 General purpose hot melt adhesive
/86 High temperature hot melt adhesive
/225 Pre-coated high temperature curing adhesive

-100:
/86 High temperature hot melt adhesive
/180 Low fire hazard hot melt adhesive

Download the PDF for 202A111-196 Straight Non-lipped Heat-shrinkable Boot

 

Product Overview - Wire & Cable, Heat-Shrink Tubing & Moulded Parts

 

TE Connectivity

Authorised Distributor for TE Connectivity
Raychem Wire, Harness, Protection & Identification Products


Terms & Conditions | Trademarks & Disclaimer | Sitemap | Download Adobe